Best milling machine t slot nut
Deal Score0
Deal Score0
Best results for milling machine t slot nut
58 Pc Pro-Series 5/8" T-Slot Clamping Kit Bridgeport Mill Set Up Set 1/2-13
$57.62
$73.75
Last update was on: September 19, 2024 12:59 am
- Our Part # ALL-48010
- Made of high quality casting steel for long life and increased durability. All parts heat treated.
- 5/8" T-Slot, 1/2-13 stud size, & 1" step block width (all standard)
- Includes (24) Studs- (4) each of 3", 4", 5", 6", 7", & 8" long <
- /li>
- <
58 Pc Pro-Series 7/16" T-Slot Clamping Kit Bridgeport Mill Set Up Set 3/8-16
$49.99
$65.49
Last update was on: September 19, 2024 12:59 am
- Our Part # ALL-48020
- Made of high quality casting steel for long life and increased durability. All parts heat treated.
- 7/16" T-Slot, 3/8-16 stud size, & 1" step block width (all standard)
- Includes (24) Studs- (4) each of 3", 4", 5", 6", 7", & 8" long <
- /li>
- <
PENSON & CO. 5/8" T-Slot Clamp Kit 58 pcs 1/2"-13 Stud Hold Down Clamping Set Upgraded for Bridgeport Mill
$54.99
$81.39
Last update was on: September 19, 2024 12:59 am
- Clamp a wide range of workpieces securely to the table while machining, milling or drilling
- Made of high grade steel and all the blocks, bolts, nuts and hold-downs are case hardened.
- Racks can be bolted to the wall or side of machine for easy access. Best among mini clamps press tool sets
- This machine clamping kit provides a variety of add-ons to fully utilize Central Machinery's two speed variable bench mill/drill machine
HFS (R) 58pc 5/8" Slot 1/2"-13 Stud Hold Down Clamp Clamping Set Kit Bridgeport Mill
HHIP 3900-2112 58 Piece Clamping Kit (7/16 Inch T-Slot) Stud Size 3/8-16
58Pc T-Slot Clamping Kit Mill Machinist Set Table Slots: 1/2"
$53.99
$64.25
Last update was on: September 19, 2024 12:59 am
- For Use With All Bridgeport Type Milling Machines & Drill Presses
- High grade hardened steel
- 1/2 Table Slot And 3/8- 16 Stud Size
- 24 Studs: 4 each of length: 3"-4"-5"-6"-7"-8" 6 T-Nuts to fit your machine 6 Flange Nuts 4 Coupling Nuts 4 Flanged Nuts 6 Step Blocks 6 Step Clamps
- Popular Design With Sturdy Stand
Bolt Dropper Bed Rail Cleat T Slot Nuts for Toyota, (4 Pack), Fits Tacoma & Tundra Bed Deck Rail Accessories & Tie Downs, Fits Screws with 3/8″-16 Thread.
$15.17
$21.09
Last update was on: September 19, 2024 12:59 am
- FITS TOYOTA TUNDRA AND TACOMA: Securely fits into the deck/side rails of both Tacomas and Tundras
- ATTACH BED ACCESSORIES: Mount extra custom cleats, tie downs, d-rings, bike racks and more! With a 3/8"-16 fully tapped and threaded hole, the possibilities are endless as to what you can attach.
- BLACK OXIDE STEEL: Superior corrosion resistance with a sleek black look.
- HIGH QUALITY STEEL: Made from the highest quality steel.
Grizzly G8750-6" x 18-1/2" Compound Slide Table
Erie Tools 50 MM Quick Vise For Mini Milling Machine Includes T-Bolts And Washers
$81.99
$118.89
Last update was on: September 19, 2024 12:59 am
- Quick vise for use with mini milling machines with 1/4 in. table slots.
- Package includes vise and two (2) T-bolts, two (2) washers, and two (2) nuts.
- Vise easily adjusts to an opening of 1-1/2 in.
- Vise features a lever to quickly move jaws to several preset positions.
- Vise can be tightened with an adjustable screw.
HHIP 3900-0301 Adjustable Clamp Assembly, 3/8-16" x 3"
24 Piece Clamping Kit For Small Milling Machines With 0.305" Table Slots
$79.99
$119.19
Last update was on: September 19, 2024 12:59 am
- Erie Tools 24-piece clamp set for milling machines.
- Clamp set includes two (2) sets of hold downs and two (2) sets of step blocks.
- Also includes four (4) threaded studs and four (4) T-nuts.
- Also includes four (4) barrel connectors and four (4) flange nuts.
- For mills with 0.305 in. (7.75 mm) table slots.
New 4"(100 mm) Tilting Rotary Table + 65 mm Chuck Self Centering+Back Plate+ Tnuts for Milling Machines
$175.00
$231.00
Last update was on: September 19, 2024 12:59 am
- Combo of 4" /100 mmTilting Rotary Table & 65 mm 3 Jaw Self Centering Chuck with Back Plate & T nuts
- Features to tilts between 0- 90 Degrees & can be locked at any position.
- Table is graduated 360 Degrees. Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees.
MILLING INDEXING 4"/ 100 ROTARY TABLE QUALITY PRECISION HORIZONTAL VERTICAL WITH SUITABLE M6 CLAMP KIT & SMALL CHUCK (WITH 65 MM 3 JAWS SELF CENTERING CHUCK)
$144.90
$165.19
Last update was on: September 19, 2024 12:59 am
- Quality Tool Set of 4" Regular Rotary Table with a 65 mm 3 jaws Self Centering Chuck with Back Plate & fixings T nut Bolts & M6 clamp kit
- Chuck Body is High Grain SG Caste Iron & Jaws are of Tool Steel. Jaws are Hardened & Ground.
- Worm Gear Ratio -1:36, which means that the 1 handle rotation shall turn the table by 10 Degrees. A Tool Steel Back Plate is supplied with Fixing T nuts to Mount the Chuck on It. Back Plate is Drill in a manner that it will fit both 3 as well as 4 slots Table. The Back side of the Plate has a locating Spigot to center the Mounting on to the Table.
8 Pack T-Slot Nuts M10 Clamping Table Slot Milling T Sliding Nut Block Slot Machine Tool M10 Screw Black
ASSORTS’s Quality 100 mm Round Vice For 4" (100 mm) Rotary Milling Indexing Table with 3 x M6 T nuts Bolts-Engineering Tools
$42.50
$48.88
Last update was on: September 19, 2024 12:59 am
- 100 mm Diameter Caste Iron Round Vise vice -Made from Close grain Caste Iron
- Designed to fit our 4" (100 mm) Regular & tilting models of Rotary Table
- Vice is counter drilled in a manner that it can fit to both 3 as well as 4 Slots Rotary Table
- * Diameter of Base : 105 mm * Jaw Width : 75 mm * Jaw Depth: 21 mm * Jaw Opening : 40 mm * Height : 32 mm
- The moving jaw has V-grooves to hold Round objects.
65 mm- 4 Jaws Self Centering Chuck with Back Plate & T-nuts for Milling
$75.00
$108.75
Last update was on: September 19, 2024 12:59 am
- Brand New , High Precision- Superb Quality !!
- 65 mm 4 Jaws Self Centering Chuck with Back Plate & Fixing- Suitable to Mount on 3" (75 mm) & 4" (100 mm) Rotary Table -4 Slots Tables
- Overall height of this assembly is around 52- 53 mm. So you can decide accordingly considering you milling machine size when you think of buying it to mount on your existing Rotary Table.
- The chuck mounting is standard unimat thread M14 x 1. Made of tool steel.
8 mm T-Slot Clamping Kit, 44-Piece
uxcell M10 Female Thread Steel T-Slot Nut Grade 12.9 Tapped Through
$6.79
$9.71
Last update was on: September 19, 2024 12:59 am
- Heat treated steel, pressing thread forming and durable.
- Bottom of T-Slot Nut Is staked to prevent the stud from protrusion.
- It is used for T-slot aluminum extrusions to connect other parts.
- T-Slot nuts enable the user to add clamps to a fixture without tearing down existing clamps
- Undersized to fit machine table slot case hardened.