Best table and belt sander
Deal Score0
Deal Score0
Best results for table and belt sander
WEN 6502T 4.3-Amp 4 x 36 in. Belt and 6 in. Disc Sander with Cast Iron Base
$119.73
$174.81
Last update was on: September 16, 2024 6:58 pm
- Two-in-one sanding machine includes both a 4-by-36 inch belt and a 6-by-6 inch disc
- Belt tilts anywhere from 0 to 90 degrees
- Sturdy cast iron base prevents any heavy vibrations
- 4.3 Amp motor provides up to 3600 RPM
- Tension release lever provides for simple changes between sandpaper grits
WEN 6515T 1 in. x 30 in. Belt Sander with 5 in. Sanding Disc
$69.85
$89.41
Last update was on: September 16, 2024 6:58 pm
- Two-in-one sanding machine includes both a 1-by-30 inch belt and a 5-inch disc
- 2.3A motor provides up to 3160 FPM for the belt and 3450 RPM for the disc
- Sturdy heavy-duty base prevents walking and wobbling during operation
- Features two separate dust ports for maximum vacuuming efficiency
- Includes a miter gauge, an 80-grit sanding disc, a 100-grit sanding belt and a 2-year warranty
BUCKTOOL 4 x 36-Inch Belt and 8-Inch Disc Sander with 3/4Hp Motor
$204.99
$274.69
Last update was on: September 16, 2024 6:58 pm
- [Save 30% on belt and disc when you purchase this machine ! ]Sanding belt and disc were directly driven by motor shaft , maintenance free, you don't have to adjust the belt tension, change damage belt like before
- Motor direct drive design can increase 25% sanding efficiency than the traditional design. Max. developed 3/4 HP total enclosed induction motor supplies silent but powerful output
- Belt can work at 0 or 90 degrees depending on the needs of your project, the driven drum allows for sanding of curved work pieces. Quick sander belt replacement design & humanized track control
WEN 6524 Oscillating Belt and Spindle Sander
$202.72
$245.29
Last update was on: September 16, 2024 6:58 pm
- Features 1/2 inch, 3/4 inch, 1 inch, 1-1/2 inch and 2 inch sanding drum sizes and one 4 x 24 inch belt
- Operate with belt speeds up to 1575 FPM and spindle speeds up to 2000 RPM
- The 3.5-amp motor oscillates the belt and spindle 58 times per minute with a 5/8-inch stroke
- Onboard storage maintains organization of all accessories and sandpapers
- Includes a beveling work table, five throat plates, four rubber sanding drums, one belt sanding attachment and six pieces of 80-grit sandpaper (one for each size spindle/belt)
RIKON Power Tools 50-151 Belt with 5" Disc Sander, 1" x 30", Blue
TACKLIFE Classic Belt Sander 3 ×18-Inch with 13Pcs Sanding Belts, Bench Sander with Variable-speed Control, Fixed Screw Clamps, Dust Box, Vacuum Adapters, 10Feet(3M) Length Power Cord – PSFS1A
$39.99
$49.99
Last update was on: September 16, 2024 6:58 pm
- Comes with 13pcs sanding belts, 7 x 80grits, 6 x 120 grits.
- ▲【2 In 1: Bench & Belt Sander】 Equipped with two metal screw clamps, Tacklife belt sander can be turned over and fixed to table, acting as a bench sander, lock-on button helps to free your hand, providing more convenience and flexibility.
- ▲【13Pcs Sanding Belts】 Come with 6pcs 120 grit and 7pcs 80 grit aluminum oxide sanding belts, saving your money, meeting the requirements for your different projects. Metal clamping lever for easy and quick sanding belt change.
JET J-41002 2-Inch by 42-Inch 3/4-Horsepower Bench Belt and 8-Inch Disc Sander
$499.00
$673.65
Last update was on: September 16, 2024 6:58 pm
- Deluxe miter gauge that turns and locks for common angles, 45 degrees both left and right
- Hinged idler wheel cover, tilting table
- Abrasive belt unit does the work of a jig saw, coping saw, or hand file while removing material and finishing
- Allows an operator to get into small openings, plus handle odd shapes and angles
- Grind, sand, or finish large work pieces on the disc unit fast and efficiently, table is slotted to accept miter gauge
Grizzly H6070 Belt and 5-Inch Disc Sander, 1 x 30-Inch
BUCKTOOL 4 x 36-Inch Belt and 6-Inch Disc Sander with Portable Al. Base
$149.99
$215.99
Last update was on: September 16, 2024 6:58 pm
- [Save 30% on belt and disc when you purchase belt sander]Sanding belt and disc were directly driven by motor shaft , maintenance free, you don't have to adjust the belt tension, change damage belt like before
- Motor direct drive design can achieve 25% sanding efficiency. Max. developed 3/4HP total enclosed induction motor supplies silent but powerful performance. This Sander meets CSA standards. We give one year warranty. For motor defective, we will replace new machine, spare parts issue will send free parts for repair
WEN 6307 Variable Speed Detailing File Sander with 1/2-by-18" Belt
$35.17
$48.18
Last update was on: September 16, 2024 6:58 pm
- Variable speed dial powers the belt anywhere from 1080 to 1800 feet per minute
- Auto-tracking belt system requires no tensioning or adjustments
- Pivot the 1/2-by-18-inch belt up to 55 degrees to meet the needs of any project
- Tool-free belt installation makes for quick and easy belt changes during the job
- Includes three abrasive sanding belts, a dust port attachment and a two-year warranty
Ginour [ 2 in 1 ] Belt Sander and Bench Sander 5 Amp 3-Inch x 18-Inch, 6 Variable-Speed, Dust Box, 2 Vacuum Adapter, 2 Fixed Screw Clamps, Lock-on Button
$37.49
$42.74
Last update was on: September 16, 2024 6:58 pm
- ♥Ginour provide free replacement & LIFETIME Warranty
- ⭐【600W 560RPM HIGH POWER】Belt sander has a high power of 600W, high rotate speed of the belt 170-250m/min, 6 adjustable speeds, no-load speed of the sander 360-560rpm that make sanding more efficient
- ⭐【SAND PLATFORM】 Ginour belt sander can be use as sand platform just need turn over and use two screw clamps fix on the table, meeting your different needs for grinding
WEN 6510T 3.5 Amp Oscillating Spindle Sander
$129.73
$153.08
Last update was on: September 16, 2024 6:58 pm
- Powerful 1/2 HP 3.5 Amp motor provides 58 OPM and 2000 RPM
- Includes six 80-Grit sanding sleeve sizes for a variety of curvatures: 1/2 in., 3/4, in., 1 in., 1-1/2 in., 2 in., 3 in.
- Features onboard storage for all accessories along with a dust collection port for hooking in a dust extractor
- Attach the dust collector of your choice to the onboard dust port to minimize clean-up
- Backed by a two-year warranty
EX ELECTRONIX EXPRESS Mini 1 x 30 Belt Sander 3400 RPM
Palmgren 2" x 42" Belt, 6" Disc bench finishing machine
JET 708599K JSG-6DCK 6-Inch/12-Inch 1-1/2 Horsepower Open Stand Belt/Disc Sander, 115-Volt 1 Phase
$1,169.99
$1,731.59
Last update was on: September 16, 2024 6:58 pm
- 1-1/2 hp, single-phase, 115/230-volt motor
- Belt operates horizontally and vertically
- 12-1/2-by-7-inch belt table
- 16-1/2-inch-by-10-inch disc table
- Two-year warranty
- Two precision-ground cast iron tables have positive stops at 90° and 45° for sanding flat pieces or mitered angles