Best makita steel chop saw
Deal Score0
Deal Score0
Best results for makita steel chop saw
Makita A-90532 12-Inch 60-Teeth Dry Ferrous Metal Cutting Saw Blade with 1-Inch Arbor
Makita A-93859-5 14-Inch Cut-Off Wheel, 5-Pack
Makita XSL06Z 18V x2 LXT Lithium-Ion (36V) Brushless Cordless 10" Dual-Bevel Sliding Compound Miter Saw with Laser, TOOL Only
$559.91
$806.27
Last update was on: March 29, 2024 6:59 am
- Powered by two LXT batteries
- x2 LXT technology delivers more power, speed and run time without the hassles of a cord
- Makita built electronically controlled BL motor delivers 4, 400 RPM for faster and smoother cutting.
- The BL Brushless motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
- Automatic speed change technology adjusts cutting speed and torque during cut for optimum performance
Makita XSC01Z 18-Volt LXT Lithium-Ion 5-3/8-Inch Metal Cutting Saw (Tool Only, No Battery)
$139.95
$187.53
Last update was on: March 29, 2024 6:59 am
- Makita-built motor delivers 3,600 RPM for faster cutting in a wide range of metals
- Compact, ergonomic design at 13-3/4" long and weighs only 5.7 lbs. for reduced operator fatigue
- Built-in L.E.D. light illuminates the work area
- Soft grip handle provides increased comfort on the job
- LXT Lithium-Ion battery and Rapid Optimum Charger produces 430% total lifetime work with 3x more cycles
Makita XSL02Z 18V X2 LXT Lithium-Ion Brushless Cordless 7-1/2" Dual Slide Compound Miter Saw, Tool Only
$679.60
$856.30
Last update was on: March 29, 2024 6:59 am
- Powerful BL Motor delivers 5,700 RPM for fast cutting
- Weighs only 28.2 lbs. with battery (battery not included) for easy portability
- Large dimensional lumber cutting capacity: 2" x 12" at 90Degree and 2" x 8" at 45Degree
- 4-Steel Rail Sliding System increases rigidity to produce superior cuts
- 5,700 RPM for fast cutting, automatic speed change adjusts cutting speed and torque
Makita A-95934 8-1/2-Inch 48T Carbide-Tipped Miter Saw Blade
$39.69
$44.85
Last update was on: March 29, 2024 6:59 am
- Ultra-thin kerf carbide-tipped design provides smoother cuts with minimal material loss
- Fully hardened and expertly tensioned steel saw plates for true cuts
- ATB (Alternate Top Bevel) tooth design for fast and clean cuts
- Designed to work with Makita and most major competitor brand 8-1/2-inch Miter Saws
- 8-1/2-inch 48T Carbide-Tipped Miter Saw Blade
Makita XBP02Z 18V LXT Lithium-Ion Cordless Portable Band Saw, Tool Only
$319.00
$452.98
Last update was on: March 29, 2024 6:59 am
- 4-3/4" cutting capacity accepts a 44-7/8" blade and is ideal for cutting multiple metal materials
- Makita-built motor delivers faster cutting with variable speed 275-530 ft./min.
- Protection circuit with built-in alert light provides over-torque motor protection warning for increased durability
- Trigger switch with lock-off feature requires two actions to power on the band saw
- Conveniently located variable speed control dial enables user to match the speed to the application
Makita A-93681 10-Inch 80 Tooth Micro Polished Mitersaw Blade
$33.00
$47.19
Last update was on: March 29, 2024 6:59 am
- Micro-Grain Carbide Teeth are Honed with up to 600 Grit for a Mirror Finish
- Fully Hardened and Expertly Hand Tensioned Steel Saw Plates for True Cuts
- Ultra Thin Kerf .091", 5 Degree Hook Angle, and .071 Plate Thickness
- Fine Crosscutting
- Ideal for: Harwood, Softwood, and Plywood
Makita B-57598-5 14" x 1" x 3/32" Abrasive Cut-Off Wheel, 5/Pk
$43.57
$54.46
Last update was on: March 29, 2024 6:59 am
- Double reinforced for longer life, less burr and less vibration
- Up to 2 times the life of a 7/64" Thick abrasive wheel
- Up to 20% faster than a 7/64" Thick abrasive wheel
- Designed for cutting heavier gauge metal such as pipe or angle iron
- Special bond improves cutting speed and wheel life
Makita A-93712 12-Inch 60 Tooth Micro Polished Mitersaw Blade
$30.99
$44.01
Last update was on: March 29, 2024 6:59 am
- Micro-Grain Carbide Teeth are Honed with up to 600 Grit for a Mirror Finish
- Fully Hardened and Expertly Hand Tensioned Steel Saw Plates for True Cuts
- Ultra Thin Kerf .091-inch, 5 Degree Hook Angle, and .071 Plate Thickness
- Smooth Crosscutting
- Ideal for: Particle Board and Laminates
Makita A-93734 12-Inch 100 Tooth Micro Polished Mitersaw Blade
$54.93
$68.66
Last update was on: March 29, 2024 6:59 am
- Micro-Grain Carbide Teeth are Honed with up to 600 Grit for a Mirror Finish
- Fully Hardened and Expertly Hand Tensioned Steel Saw Plates for True Cuts
- Ultra Thin Kerf .091", 5 Degree Hook Angle, and .071 Plate Thickness
- Ultra-Fine Crosscutting
- Ideal for: Hardwood
Makita B-10849-5 14-Inch Cut-Off Wheel, 5-Pack
$23.62
$27.87
Last update was on: March 29, 2024 6:59 am
- 14-Inch diameter by 1/8-Inch thick, 1-Inch arbor Cut-off Wheel
- A36P B.F. Premium 5 pack
- Aluminum oxide
- Cuts Ferrous metals, Steel, angle iron, brass, bronze, carbon steel, and other metals
- Consistent performance with long life and fast cutting
Makita 10 Pack – 4.5" Cut Off Wheels For Grinders – Aggressive Cutting For Metal & Stainless Steel/INOX – 4-1/2" x .045 x 7/8-Inch
$19.99
$25.79
Last update was on: March 29, 2024 6:59 am
- ✅ 10 MAKITA Premium 4-1/2” Type 1 Flat Cut Off Wheels for Metal & Stainless Steel (INOX) | 4-1/2-Inch x .045-Inch x 7/8-Inch | Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders with 5/8” arbor
- ✅ CUT 2-3X MORE than lower quality or excessively thin wheels due to this wheel’s Carefully selected Grain Grit, Hard Bond Matrix & Wheel Thickness that provide the best balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup in the industry, allowing you to cut longer, consistently precise with unmatched wheel integrity, moderate power demands and relatively low heat buildup
Makita A-93675 10-Inch 60 Tooth Micro Polished Mitersaw Blade
$29.99
$42.59
Last update was on: March 29, 2024 6:59 am
- Micro-Grain Carbide Teeth are Honed with up to 600 Grit for a Mirror Finish
- Fully Hardened and Expertly Hand Tensioned Steel Saw Plates for True Cuts
- Ultra Thin Kerf .091", 5 Degree Hook Angle, and .071 Plate Thickness
- Smooth Crosscutting
- Ideal for: Particle Board and Laminates
Makita A-94817 12-Inch 100 Tooth Ultra Coated Mitersaw Blade
Makita 792297-7A 80T Miter Saw Blade, 14-Inch by 25mm
Makita 123241-2 Dust Bag
Makita XCV04Z 18V X2 LXT Lithium-Ion Cordless/Corded Dry Vacuum, 2.1 gallon
$591.26
$668.12
Last update was on: March 29, 2024 6:59 am
- Powerful Makita-built motor delivers 127 CFM and 96" water lift of suction using corded power
- Powerful Makita-built motor delivers 74 CFM and 36" water lift of suction using two 18V LXT Lithium-Ion batteries (batteries not included)
- Efficient three stage filtration system captures large, small and micro dust particulates extending the life of the main filter
- Up to 65 minutes of continuous run time on low setting and 30 minutes on high setting using two 18V LXT Lithium-Ion 5.0Ah batteries BL1850B (batteries not included)