smarthomepromotion 
Best results for neiko right angle drill
Neiko 11402A Stubby Drill Bit Set for Metal, 5 Piece | 1/4-Inch Quick Change Hex Shank | M2 HSS Steel
$13.99
$16.09
Amazon.com
Last update was on: May 21, 2024 9:33 pm
- Short bits are constructed of heavy duty, Premium molybdenum M2 high speed steel with evenly distributed carbides for resistance against wear
- 135 Degree standard tip design delivers powerful penetration against metals, plastics and other hard surfaces
- 1/4-inch hex shanks are compatible with standard and quick change chucks and drivers, providing versatility in drilling needs
- Each stubby Bit measures from 1. 9 inches to 2. 32 inches for working in hard-to-reach tight spaces with short and right angle drills
Makita DA3010F 4 Amp 3/8-Inch Right Angle Drill with LED Light
Amazon.com
Last update was on: May 21, 2024 9:33 pm
- Powerful 4.0 AMP motor with less weight (3.5 lbs.)
- Variable speed (0-2,400 RPM) for controlled drilling in wood/metal and speedy fastening
- Built-in L.E.D. light illuminates the work area
- Compact design (10-5/8"" long and 2-5/8"" head width) for use when working between framing studs and other close quarter applications
- Paddle switch with speed limiting dial to prevent over-tightening of fasteners and for easy one-handed operation
Neiko Tool 30084AA Drive Reversible Angle Head Air Drill, 3/8"
$62.40
$80.50
Amazon.com
Last update was on: May 21, 2024 9:33 pm
- The 90 degree right angle air drill makes for easy work in confined spaces that can't be reached with regular drills
- Lightweight, ergonomic design makes for great comfort while only weighing in at two pounds for less hand fatigue
- Reversible air drill is great for close clearance operations and service work with low profile
- Convenient rear exhaust allows the debris to blow away from your face
- Specs: the air drill runs a free speed of 1900 RPM, 90 PSI, 4 CFM, 3/8" hose size, and 1/4" NPT inlet size
Angle Drill, GALAX PRO 3.5 Amps Close Quarter Power Drill 3/8" Right Angle Drill with Keyed Chuck, Ideal for Drilling for Wood, Plastics, Masonry, Metal and Screwdriving-GP56202
$49.99
$71.99
Amazon.com
Last update was on: May 21, 2024 9:33 pm
- ✿ COMPACT DESIGN: Compact design for use when working between framing studs and other close quarter applications. Slim body with small protrusion of brush holder for easy gripping, and lightweight body, weighing 4.5 pounds net, ideal for drilling and screwing in blind/tight space
- ✿ 10mm KEYED METAL CHUCK: This right angle drill has 3.5 Amps motor for excellent drilling performance, which delivers up to 1,600RPM. This drill is equipped with a 10mm keyed metal chuck for durability, namely prolong the service life. Lock-On button maintain a continuous maximum speed run, no need to press the start trigger all the time
Neiko 10503A 6.0 Amp Corded Hammer Drill, 1/2-Inch Chuck, 2,800 RPM | Metal, Wood, Masonry | Variable Speed
$30.99
$42.15
Amazon.com
Last update was on: May 21, 2024 9:33 pm
- * limited time offer * the half-inch chuck hammer drill features a maximum no-load speed of 2, 800 RPM a 120-volt motor with overload protection for safety and power
- Features 2 modes of function: hammer drill (Hammering and rotation) and drill (rotation only) for drilling holes in light masonry material including wood, bricks, mortar, stone, and concrete blocks
- Have total control over operations with forward and reverse directional switch, speed setting knob, and variable speed trigger, with the lock button to maintain desired drilling speed
DEWALT 20V MAX Right Angle Cordless Drill/Driver Kit (DCD740C1)
$176.45
$254.09
Amazon.com
Last update was on: May 21, 2024 9:33 pm
- Dual speed ranges (0-600/0-2000) RPM for increased user flexibility provides a wide range of applications
- Compact front-to-back length (4 inches) allows users to fit into hard-to-reach spaces
- Multi-grip trigger provides comfort and convenience, allowing the user to get into tighter spaces
- Light weight at only 3.9 pounds to minimize user fatigue
- Powered by an Energy Star-qualified charger for a better environment
Black & Decker BDCS50C 4V Roto-BIT Storage Screwdriver
$23.95
$33.29
Amazon.com
Last update was on: May 21, 2024 9:33 pm
- 4V Lithium power holds a charge up to 18 months
- Rotating bit cartridge stores bits and provides easy accessibility
- Includes 8 bits for a wide variety of tasks
- On-board magnet holds extra screws
- LED light to illuminate your work surface. Included Components: Charger, #10 Torque Bit, #20 Torque Bit, #4 Slotted Bit, #1 Square Bit, #2 Square Bit, #4 Hex Bit, #0 Phillips Head Bit, #2 Phillips Head Bit
Milwaukee 2615-20 Cordless M18 Right Angle Drill, Tool only
$119.00
$133.28
Amazon.com
Last update was on: May 21, 2024 9:33 pm
- The product is easy to use
- The product is durable
- The product is manufactured in China
- Head length great for working in tight spaces, 3/8-inch single sleeve ratcheting chuck
- Eleven settings and drill mode for complete control in fastening applications
- Extended multi-position handle provides convenience and versatility
DEWALT Right Angle Drill Adapter DWARA050 HD Version in Retail Pack
$39.99
$45.19
Amazon.com
Last update was on: May 21, 2024 9:33 pm
- Increase the productivity and versatility of your existing drill with the DEWALT DWARA50 Right Angle Drill Adapter. Just tighten this adapter in your chuck and you instantly have access to tight and hard to reach spaces. For use with both corded and cordless drills.
- Tighter access with your current drill/driver
- 2X longer life than the competition
- Accepts any 1/4 in. hex shank accessory
- For use with most drill
Ginode 90 Degree Right Angle Bend Extension 0.8-10mm Cordless Drill Attachment Adapter 8mm Hex Shank Power Electric Drill Tool (Jaw Chuck Range/0.8-10mm)
$21.99
$31.89
Amazon.com
Last update was on: May 21, 2024 9:33 pm
- ▲Max. 1500RPM and 25N·m torque. heavy duty steel material.
- ▲8MM HEX SHANK - suitable for most standard drills like hand/power drills, electric drill, buffing attachments etc.
- ▲90 DEGREE - It can make drill power swerve 90°and get to hard-reached places.
- ▲10MM KEYLESS CHUCK - The tool's chuck accepts standard 0.8mm-10mm drill bits.
- ▲24MM LENGTH HANDLE - simple to install and operate, with a handle for stable usage.
Neiko 03043A Right Angle 1/4-Inch Dual-Drive Head Mini Ratchet Wrench Screwdriver Bit and Socket 17-Piece Set | CR-V Steel
$13.99
$16.65
Amazon.com
Last update was on: May 21, 2024 9:33 pm
- Low profile 5.5-inch handle with offset 90 degree angle ratchet driver is exceptional for working in small, close quarters spaces
- 12-teeth reversible ratcheting mechanism features thumb lever to switch between clockwise and counterclockwise operation
- All bits are constructed of chrome vanadium steel for extra strong durability and resistance to tool wear-out
- Dual head design outfits the tool with a socket and driver bit simultaneously to cover fastening needs without having to go back to the toolbox
Neiko 01323A Ultra Low Profile Offset Screwdriver Set, 5-Piece | Heavy Duty S2 Steel Construction
$10.99
$12.64
Amazon.com
Last update was on: May 21, 2024 9:33 pm
- Utility selection of 5 screwdriver tips for your everyday needs at home or at the shop
- suitable for maintenance and repair of electronics, home appliances, equipment and more
- Each screwdriver bit is constructed of durable S2 alloy steel, with surface featuring visible color-coded driver shapes and sizes imprinted on body handle for clear and easy identification of bit measurements
- Slim 3mm depth body handle with 15º bent angle by the drive head end makes for exceptional close quarters fastening in tight spaces
Neiko 00228A Socket Adapter Extension Set, 3Piece | 1/4, 3/8/ 1/2" Impact Drive, CR-V Steel | 6" Length Compatible with Power Drills & Drivers
$11.99
$17.03
Amazon.com
Last update was on: May 21, 2024 9:33 pm
- Quarter inch hex shank is compatible with Power corded and cordless impact drivers and drills, including right angle drills, for greater torque application over hand ratchets
- Made of Highly Durable Chrome vanadium steel and coated with corrosion resistant black phosphate for extended use and durability against heavy duty environments
- All pieces are outfitted with a spring loaded detent bearing ball that locks onto sockets to ensure a secure fit into the driver head to prevent slipping and loosening
Neiko 11108A Aluminum Oxide Flap Disc | 4.5" x 7/8-Inch, 80 Grit, Flat Type #27-10 Pack
$15.97
$19.64
Amazon.com
Last update was on: May 21, 2024 9:33 pm
- 80 grit 4-1/2" flap disc makes it ideal for high performance grinding, deburring, contouring, blending, and finishing with smooth edges on sheet metals
- Flat Type 27 disc construction clears rust and deburrs paint, steel and nonferrous metals including brass, copper, and lead
- 7/8-inch arbor size flap disc is compatible with angle grinders and can be operated with up to 13,000 RPM
- Constructed of industrial grade aluminum oxide abrasive material for strength, durability and extended disc life
