smarthomepromotion 
Best results for solid carbide twist drill bit
Chicago Latrobe 769 Solid Carbide Short Length Drill Bit, Uncoated (Bright) Finish, Round Shank, Straight Flute, 140 Degree Converntional Point, 1/8" Size
$16.65
$20.48
Amazon.com
Last update was on: May 22, 2024 2:57 am
- Straight flutes drill shallow and horizontal holes in cast iron, and non-ferrous and hardened materials
- Carbide resists wear better than high-speed or cobalt steel and withstands high speeds
- Uncoated (bright) finish is an untreated surface that can be used on a range of materials
- Self-centering 140-degree 4-facet point provides strength and high accuracy to penetrate material more easily than a conventional point, and produces small chips to reduce clogging
21 Pc Cobalt M42 Drill Bit Set 1/16" to 1/2" by 32nds DRILL HOG USA
MaxTool 29 Piece Twist Jobber Length Drill Bit Set; 8% Cobalt High Speed Steel HSS M42; 135° Split Point; Fully-Ground; JBS42G10R029P
$99.99
$142.99
Amazon.com
Last update was on: May 22, 2024 2:57 am
- 29pcs jobber length drill bits includes inch sizes 1/16" to 1/2" in 1/64" increments
- Premium Quality 8% Cobalt High Speed Steel M42 (Hardness up to HRC68) provides all drills long tool life
- Precision fully ground ensures chips moving smoothly, ultimate accuracy and performace
- Golden surface finish resists corrosion and increases the hardness of the drill bits
- 135-degree split point prevents "Walking", reduce logging, and penetrates hard material without a pilot hole
Cobra Carbide 35375 Micro Grain Solid Carbide Stub Length Drill Bit, TiAlN Coated, Round Shank, Slow Spiral Flute, 135 Degrees Split Point, 3/16" Size, 2-3/16" Length (Pack of 1)
$12.76
$16.97
Amazon.com
Last update was on: May 22, 2024 2:57 am
- Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
- Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant ("dry machining")
- Round shanks allow use with a wide variety of toolholding systems
- When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
1/4" 0.250 Made in USA Solid Carbide Straight Flute Drill Bit by Impromech Cutting Tools
Drill Hog USA 13 Pc COBALT Drill Bit Set Index M42 Drill Bits
Drill Hog 29 Pc Cobalt Drill Bit Set M42 Drills Drill Hog
$139.99
$180.59
Amazon.com
Last update was on: May 22, 2024 2:57 am
- Premium Solid Cobalt M42 Super High Speed Steel
- 1/16" to 1/2" in 1/64th Increments (Does not Skip any Sizes)
- High Heat Treated Hardness 68-70 HRC (Rockwell Hardness Scale)
- 135 Degree Split Point Prevents "Walking"
- Tri-Flat Shank Prevents "Spinning" in Chuck
Ventercess Rotary Burr Set Carving Tool Tungsten Carbide Steel Solid Twist Drill Bit Grinding Head for Dremel Rotary Tools Woodworking Engraving Drilling(10pcs)
$13.95
$20.37
Amazon.com
Last update was on: May 22, 2024 2:57 am
- 【Premium Material】Made of high quality tungsten steel, can be used to process: iron, steel, carbon steel, alloy steel, stainless steel, copper, aluminum and other metals, and marble, jade, bone and other non-metal. Processing hardness up to HRA≥85
- 【High Work Effenciency】The processing efficiency is tens of times higher than the manual file tool, and nearly ten times higher than the small grinding wheel with the handle. Basically the potary burr set can take place of the small grinding wheel with the handle, no dust and pollution are created.
DEWALT Cobalt Drill Bit Set with Pilot Point, 14-Piece (DWA1240)
LMT Onsrud 67-807 Solid Carbide 8 Facet Drill Bit, Uncoated (Bright) Finish, Round Shank, Eight Facet Point, 1/8" Size (Pack of 1)
$28.09
$33.43
Amazon.com
Last update was on: May 22, 2024 2:57 am
- Jobber length drill bit has a midrange drilling depth for general-purpose applications
- Solid carbide drills produce close-tolerance holes in hard materials, and have a longer tool life at higher speeds than cobalt and high-speed steel (HSS)
- Uncoated (bright) finish has no additional surface treatment or coating
- 8-facet point with four cutting edges prevents delamination when drilling difficult-to-machine composite materials
Precision Twist DS 90 Solid Carbide Spotting Drill Bit, Uncoated (Bright) Finish, Round Shank, Spiral Flute, 90 Degree Point Angle, 1/4"
$28.44
$31.28
Amazon.com
Last update was on: May 22, 2024 2:57 am
- Intermediate-length spotting drill bits, for starting holes
- 90-degree conventional point angles, for reduced stress on drill’s
- Round shanks, for use on a variety of tool-holding systems
- Uncoated (bright), for use with a wide range of drilling materials
- Carbide, for use on abrasive materials and high cutting temperatures
CMT 363.050.11 V-Point Solid Carbide Twist Drill 120° sharpening, 5mm (13/64-Inch), Right-Hand Rotation
$20.80
$25.38
Amazon.com
Last update was on: May 22, 2024 2:57 am
- 28mm (1-7/64-Inch) Cutting Length, 62mm (2-7/16-Inch) Overall Length.
- 2 precision ground carbide cutting edges, 2 flutes.
- Premium solid tungsten carbide, 120° V-point sharpening.
- Shank corresponds to cutting diameter.
- To be used in adapter bushings.
CMT 363.025.11 V-Point Solid Carbide Twist Drill 120° sharpening, 2.5mm (7/64-Inch), Right-Hand Rotation
Amazon.com
Last update was on: May 22, 2024 2:57 am
- 27mm (1-1/16-Inch) Cutting Length, 57mm (1-1/4-Inch) Overall Length.
- 2 precision ground carbide cutting edges, 2 flutes.
- Premium solid tungsten carbide, 120° V-point sharpening.
- Shank corresponds to cutting diameter.
- To be used in adapter bushings.
Wkstool Φ2mm,Micro Solid Carbide Drill Bits,Straight Shank,TiAlN Coated,Metric,for Stainless Steel,Alloy and Hard Steel (Ø2mm -20mm Flute Length-40mm Full Length, for Steel)
1/8" Jobber Drill Carbide Tipped 118° Standard Point USA Made (0.125"), 50358
$11.40
$12.88
Amazon.com
Last update was on: May 22, 2024 2:57 am
- 0.125" diameter carbide tipped jobber length drill 118° standard point
- 1 5/8" length of flute
- 2 3/4" overall length
- 1/8 diameter. Tool Diameter Tolerance: +0"/-.0005"
- Used by machinists and hobbyists for general purpose drilling of most materials.
